HOME

Keihin Co., Ltd. develops and sells solenoid valves,
automatic sprinklers

Japanese
Company Profile Whatfs New Valve and Engineering Divisions Engineering Division Recruitment Info aribaba
HOME  „  Engineering Division  „  Sprinkler Equipment
Sprinkler Equipment
<<backOther Sprinkler EquipmentFiltomatnext>>
Keihin Valve Box

Keihin offers Solenoid Valve Boxes, Sprinkler Boxes and Unlabeled Boxes, and we supply a variety of sizes, including the KMB-20 and KMB-25. You can also control the depth with the adjustable frame.

Model Upper section Adjustable frame
Width
(W1)
Length
(L1)
Height
(H1)
Width
(W2)
Length
(L2)
Height
(H2)
KMB-20 252mm 450mm 150mm 322mm 450mm 150mm
KMB-25 284mm 570mm 200mm 346mm 570mm 200mm
Sprinkler Expansion Joint

The sprinkler expansion joint is connected to the lower part of pop-up sprinklers so that you can adjust sprinklers to the proper height. If your sprinklers are buried under the lawn, this versatile device makes it possible to adjust the sprinklers level with just a twist, and without turf removal.

Quick Coupling Valve

The Quick Coupling Valve is installed underground, and is optimal for watering lawns when use of long hoses is unsuitable. The coupler key installed on the sprinkler is inserted to operate the sprinkler.
When it is removed, the valve closes and the sprinkler stops.

Swing Joint

The Swing Joint makes it easy to adjust sprinklers to the proper height and position. It prevents damage to sprinkler pipes caused by them being trodden on, etc. The Swing Joint is made of vinyl chloride, and is more resistant to rust and corrosion than metal pipes, and is also highly durable.

Sprinkler for Part/Full Circle Use

85 EHD Diameter: 25 mm (male screw)

¥Jet angle 27‹
¥You can use the sprinkler as a whole-rotary type sprinkler by raising the trip shaft
¥Any arc setting between 20‹and 340‹ is possible

Sprinkler Hose

The Sprinkler hose has an outer coating made of tetoron (polyester), and rubber on the inside, offering superior durability.

Sprinkler Stand

¥This product is a portable stand for sprinklers. The mounting screws used are taper pipe thread 1h screws, and the water suction port used is a 40 mm female machino coupling. The product is also available without female screws.
¥Made from steel with a uni-chrome finish.



<<backOther Sprinkler EquipmentFiltomatnext>>
pagetop
Inquiry Privacy Policy