The example for which our valves were used in the past.
An electromagnetic valve is used for high-pressure gas ejection formation equipment. High-level safety and reliability in need.
Solenoid valve
| SSPDH | 32MPa (Direct Acting) |
|---|---|
| SSPD | 20MPa (Direct Acting) |
| SSAP | 20MPa (Pilot Operated) |
The solenoid valve for low temperature is used for refrigerant control of Chiller or Refrigerator.
Solenoid valve
| VSSPD | It may control the wide temperature range from -70 ℃ to 80 ℃. |
|---|---|
| VSPD-LN2M | For liquid nitrogen -196 ℃ |
Constant flow valve is used for pure water manufacturing equipment/ an artificial dialyzer. It may control the constant flow mechanically, the deionized water of the fixed amount may be produced.
Constant Flow valve
| FPC | 0.7 to 7.0 L/min Flow Rate |
|---|---|
| NSPW | 5.0 to 55 L/min Flow Rate |
| NFFW | 30 to 10000 L/min Flow Rate |
Constant flow valve is used for flow rate control at the time of tanker’s petroleum supply and the protection of the flown meter.
Constant Flow valve
| FPC | 0.7 to 7.0 L/min Flow Rate |
|---|---|
| NSPW | 5.0 to 55 L/min Flow Rate |
| NFFW | 30 to 10000 L/min Flow Rate |
The ball type non-return valve of NW connection is used in the pulsometer protection use of the semiconductor industry.
NW connection valve
NR-B | The ball type non-return valve (For vacuum) |
|---|
Constant flow valve and non-return valve are used for digestive sprinkler equipment of the tunnel and the building. Because of the spring structure inside, you can freely decide the installing direction.
Constant Flow valve
| FPC | 0.7 to 7.0 L/min Flow Rate |
|---|---|
| NSPW | 5.0 to 55 L/min Flow Rate |
| NFFW | 30 to 10000 L/min Flow Rate |
Inline Check Valves
NR | Inline Spring Type (CAC406) |
|---|---|
NR2-S | Inline Spring Type (SUS) |
It’s used for water level control of the cascade tank. It’s tough enough for shaking of a ship and stop chattering.
Level Control valve
ACL | Ball tap less type (CAC406) |
|---|---|
SSACL | Ball tap less type (SUS304) |
Introduction case study by industry
Atomic energy/thermal power plant | [Unit/Line] fuel control line and the generator control line [Valves] Solenoid valves, Check valves |
| petroleum refinery | [Unit/Line] the petroleum charging line (tank truck shipment) [Valve] Constant flow valves(fixed flow rate valve) |
–Solenoid valves and Check valves are used for a fuel control line and the generator control line.
–Constant flow valves(fixed flow rate valve) are used for the petroleum charging line.
Food manufacture factory and store | [Unit/Line] |
– The solenoid valve, the air-operated valve and the motorized ball valve are used for a food production unit.
– Constant flow valve is used for store equipment water-saving measure.
Manufacturing factory and the plant | [Unit/Line] [Valve] |
– The valve is used in each production unit or manufacturing line, such as the solenoid valve, the air-operated valve and the water level control valve.
– Electronic flow regulating valve FX is used for the test apparatus.
Bullet train | [Unit/Line] emergency brake equipment for rolling stock |
Ship | [Unit/Line] Shipping fuel controller, (cascade tank/drinking water tank), water level control and Ballast water treatment system |
-A solenoid valve Y is used for vehicle emergency start-and-stop device of the Bullet train.
– Constant water level control valve ACL/SSACL is used for cascade tank water level control of the ship.
-Ballast water treatment system is used by Constant flow valve NSPW/NFF for the chemical liquid flow rate adjustment and supply water volume adjustment.
A manufacturing factory of medical supplies. Hospital | [Unit/Line] |
-Cold solenoid valve for-liquid-nitrogen VSPD-LN2M (-196 ℃) is used for cell freezing equipment of the medical application and liquid-nitrogen dropping equipment.
-A high-temperature solenoid valve and a check valve are used for the sterilizer.
Building and tunnel | [Unit/Line] [Valve] |
-Constant flow valve NSPW/NFF and check valve NR2-S is used for fire sprinkler equipment in the building tunnel.
Housing, building and the water supply main | [Unit/Line] [Valve] |
-The motorized ball valve is used for the air conditioner like the fan-coil-unit and the air handling unit.
-Constant flow valve NSPW/NFF is used for the flow control when it’s supplied to a building from the waterworks main.
Semiconductor manufacturing factory | [Unit/Line] [Valve] |
-The air pressure operational valve and a manual ball valve of NW connection are used for pollution abatement equipment for exhaust gas.
-NW connection A check valve is used for vacuum compressor (dry pump) protection.
Golf course, field and fountain | [Unit/Line] [Valve] |
-The solenoid valve is used for automatic watering in the golf course and field irrigation.
-The solenoid valve and the non-return valve are used for fountain equipment.
International Sales Division +81-45-453-1616 Hours: 8:50 A.M. to 5:40 P.M.
